Vedo3 & Vedo4
HQ on site audio /video monitoring terminal
Vedo3 and Vedo4 are high quality monitoring terminals specifically designed to be used in transmission sites. They are equipped with high quality LCD display touch screens (3 in Vedo3 and 4 in Vedo4). Monitoring includes audio level bars, field strength, BER and packet errors. Every panel is independent and is capable of ASI and RF inputs which make the unit highly flexible for all types of onsite and control room monitoring.
Each panel is equipped with 2 inputs (‘A’ and ‘B’) which can be easily selected using the touch screens. RF inputs are capable of DVB-T/T2, DVB/S/S2, or DVB-C depending on the option chosen.
Vedo3
Rack: 3U with only 180 mm deep
Display: TFT LCD 5.6’’ in 4/3 format.
Vedo4
Rack: 2U with only 300 mm deep
Display: TFT LCD 4.3’’ in 16/9 format.
INPUT
Bandwidth: 7 MHz (BIII); 8 MHz (UHF)
Input level: -80 / -25 dBm
Input level: From 100 mV a 2000 mV internally equalized
Max. Bit-rate: 75 MB / s
CONNECTORS
ASI input: BNC 75 ohm (EN50083-9)
Ethernet: RJ45
3.5 mm jack: for audio monitoring of each monitor
RF CHARACTERISTICS
System: DVB-T / T2
Band: BIII, UHF
Scan function: Yes
Quality check: Yes
BER indication: Yes
MISCELLANEOUS
Comunication: SNMP, HTTP, Telnet protocol
Software: Upgrade via ethernet
Operating temperature: 0 / +50 °C
User interface: Touch screen
Computer: ARM11 embedded + Linux
Hardware decoding: SD / HD MPEG2 / H264
Engine: FPGA ALTERA
Modes: Burst and continuous 188, 204
Very high viewing angle, up to 180°
Can decode video streams over UDP
Selectable audio on embedded speakers
Audio levels viewable on each screen
Viewable PID contents in each service
POWER SUPPLY
Power supply: 240V
Power can also be supplied through a power injector and a 12Vdc / 0.5 A power supply.
ORDERING CODES
VEDO3-T2 DVB T/T2 HQ multi-viewer, 3 display 5.6’’touch screen, 3 RU
VEDO4-T2 DVB T/T2 HQ multi-viewer, 4 display 3.5” touch screen, 2 RU